Welcome to the cannabis deficiencies and solution section. In this section you will find and can ask about cannabis plant growth issues, cannabis deficiencies, cannabis toxicity issues, cannabis pest issues. If your cannabis plant has a issue you can look for answers here. To become part of our online cannabis growing community click here to register.

Bud Rot or Mould

Post Reply
User avatar
Keeno
Site Admin
Posts: 25512
Joined: Sat Oct 07, 2017 10:11 pm
Has thanked: 10550 times
Been thanked: 17044 times
Contact:
Status: Offline

Bud Rot or Mould

Post by Keeno »

Bud Rot or Molud



Symptoms

Leaf Colour:
Edges Appear Brown or Burnt
Pale Colour Leaves
Yellow Leaves - New Growth
Dark or Purple Leaves

Leaf Symptoms:
Upper Leaves / Newer Growth Affected
Spots
Abnormal Growth

Other Symptoms:
Mould



Sometimes the first sign of bud rot is a few leaves on the buds turn yellow seemingly overnight. The base of these leaves is where the bud is rotting

How to Prevent & Stop Bud Rot (quick summary)
Air circulation - It's a really great idea to have an exhaust fan constantly venting out hot humid air and replacing your grow space with fresh air whenever possible. But no matter what, make sure there’s always plenty of air moving over all the buds and leaves, and through the plant. This can take some planning.

Don’t let plants get cold, if possible - Temperatures warmer than 68°F (20°C) help prevent fungus spores from germinating.

Avoid wetness and high humidity - Don’t allow buds to sit in damp or overly humid conditions for long. Cover plants when it rains, and otherwise shake them off when they're wet. Bud rot is a fungus, and like all fungi, it needs a wet place to germinate.

Consider defoliating extremely bushy plants - If it's extremely bushy and you can't keep the humidity down, consider defoliating (removing leaves) on the middle and bottom of the plant. Each leaf is constantly adding moisture, and removing leaves helps lower the humidity around the plant. Any leaves that aren't getting light are only stealing energy away from your plant by the time buds are big enough to worry about bud rot. Those leaves are better off gone especially if you need to lower the humidity!

Keep an extremely close eye on your longest, fattest and most dense colas. Almost like a cruel joke, bud rot usually attacks your biggest colas :(

Remove all affected buds immediately - Carefully remove and discard all buds with bud rot, as well as nearby buds - this is incredibly important if you don’t want to lose the whole harvest! Don't let anything any of the rot touch other parts of your plant, as it can further spread mould spores.

What Does Bud Rot Look Like?
Usually a bud rot infection becomes visible in just certain parts. Sometimes just the bigger and more dense buds are affected, but other times you'll get patches all over the plant, especially after a few rainy days.

You may see areas on the colas where everything (buds, pistils and/or leaves) are darkening, becoming discoloured and/or drying up, unlike the rest of the plant.



The deadened spots usually stand out and catch people's attention, even if growers don’t know what’s wrong, they often instinctively know that something is wrong since the spots don't look like the rest of the buds on the plant.

In addition to the rot itself, you may see white mould on the outside of the bud at first - this is the first stage and it means plants need to be treated immediately! With advanced bud rot, the bud will easily separate so you can see inside. When the bud in question is inspected, it will be dark on the inside, usually grey or brown, and possibly dusty (this "dust" is fungus spores).

Depending on the life stage, bud rot can look…
white and fluffy
dark grey or brown (sometimes even dark purple)
the buds can be full of dark speckled dust which easily blows away (fungus spores)

Sometimes you might see a few yellow leaves appear suddenly on some of your biggest colas. It can feel like it happens overnight. That could be a sign that there's mould at the base of these leaves. Always investigate any cola with yellowing leaves ASAP. If there's mould you will be able to see the leaves are basically falling out, with mould or brown spots being revealed in the middle. :(



Different Stages of Bud Rot - Catch it Early!
When plants are afflicted by cannabis bud rot, it starts as fluffy white growth in the middle or sides of buds, but the white mould quickly darkens into grey or brown and burrows deep into dense buds as the fungus takes hold. Sometimes you'll see the initial stage on the sides of buds, giving you a possible chance to catch the infection early.

The Botrytis fungus looks white and fluffy in its initial stage, but you'll probably never even see this stage before the mould quickly darkens and starts rotting the buds from the inside out.



Once bud rot has taken hold over parts of a cannabis plant, the buds can sometimes look almost the same on the outside, at first, but they usually start looking like they're dying in patches. Often the area will dry out and easily pull apart. The inside of buds can turn brown, grey or even purple.



Some growers might think these drying spots mean that the plant is almost ready for harvest, but you know something is definitely wrong when just parts of the colas are being affected.



Here's an example of advanced bud rot on an outdoor cannabis plant .



What Causes Bud Rot?
Cannabis bud rot is caused by a type of fungus known as Botrytis cinerea.
In cannabis plants, Botrytis causes buds to rot out from the inside, hence the name “bud rot.” If you crack open an infected bud, the inside will be a mouldy dark grey or brown.



Bud rot can show up in many ways. For example, this cola here responded to bud rot by turning purple and mushy. with leaves that becoming crispy and dying. This is what the grower came back to find after a few days of rain.

Did you know? In addition to cannabis bud rot, Botrytis causes problems for many different types of plants, including wine grapes, strawberries and peonies.

Botrytis the fungus is sometimes referred to as "botrytis bunch rot," “botrytis blight,” “bud rot,” “grey mould”.

When it comes to cannabis, it is often only called “Bud Rot” since that’s the main symptom cannabis growers are worried about.

Any part of the cannabis plant affected by bud rot should be discarded immediately! This helps prevent further infection and all buds touched by this toxic fungus should never be smoked or used.



Throw Away All Buds with Any Sign of Bud Rot!



This is What Bud Rot Looks Like Ground Up.



There are different stages of Botrytis as it matures and tries to release spores. An infection starts as fluffy white mould, and then spreads throughout the inside of vulnerable buds. The inside of those parts of the colas darken to grey or brown. Once that has settled in, the mould tries to reproduce. The insides become filled with dark speckled dust that easily floats and spreads if the bud is cracked open. These are the spores of the fungus, so be careful to avoid breathing in letting this speckled dust ever touch other parts of your plants.

Luckily, healthy cannabis plants will not develop bud rot unless exposed to stagnant air and cold, wet conditions for an extended period of time.

How does the Botrytis fungus get to my plants?
Bud rot is spread to plants by dusty grey spores, usually in wind or water.
Most common ways Bud rot fungus spores get to plants
Wind
Rain Water

If your plants are never exposed to these spores, they will never get bud rot.
Unfortunately the spores can easily be carried to your plant by a breeze, rain, from contact with animals, or even by clones from another grow room. Dormant spores can survive in many conditions only to affect your crops another time!

But... it's not so bad. The fungus will never germinate if you take good care of your buds. And in any case, your plant needs a “wound” of some sort for the spores to take residence in your buds.

Possible wounds that can let Bud Rot fungus in include cracks in the stem from wind or over-training, damage from caterpillars, snails, worms, white powdery mildew, other pests and larva, or any other type of injury or weak point can the the point of entry for bud rot spores into the plant.

Luckily, even if your plant has been exposed to spores, Nothing will be able to survive and begin the cycle of a bud rot infection if you provide your cannabis with a warm, dry breezy environment.

Bud Rot needs cool, wet conditions and stagnant air to thrive.
What triggers spores to grow into a full-blown case of bud rot?
Cool Temperature
Cool temperatures (~60-70°F or 15-20°C) are ideal for spore germination
Wet Buds
Rainy weather, especially if it lasts for days in a row
High humidity
Any situation where buds remain wet for several continuous hours
Bad Air circulation
Lack of wind or air circulation over the top o through the inside the plant
Very leafy plants (which tend to collect water in between leaves, and prevent air circulation through the plant
Big Colas
Massive, dense colas have nice wet conditions on the inside which don’t get exposed to any air. This makes them a prime target for Botrytis bud rot.

How to Control Bud Rot (these are most important!)
How to Prevent Bud Rot
These are the most important points to remember...
Good air movement - Create good air circulation and make sure there’s always plenty of air moving over all the buds and leaves.

Keep plant warm, if possible - Temperatures below 68°F (20°C) creates the right environment for fungus spores to germinate. Controlling temperature goes a long way.
Avoid letting buds stay wet - Don’t allow buds to sit in damp or overly humid conditions for long. Protect your plants from rain and control the humidity.

Remove all affected buds immediately - Carefully remove and discard all buds that have possibly been affected by bud rot. Don't let any rot touch other parts of your plant. This helps prevent bud rot from spreading.

Other tips to help prevent bud rot...
Avoid plant wounds. Avoid injuring your plants, especially in the flowering stage. Don’t leave open wounds to seep out water and nutrients - cover any open injuries with tape or some other “cast” until injury closes up. Also avoid pests and keep plants healthy. A healthy plant is much less susceptible to infections.

Defoliate leafy plants. Remove leaves on very leafy plants, but don't take too much. In fact you want to take off as few leaves as you can, especially if growing outdoors.

Only remove leaves that are covering or touching bud sites, as well as any leaves that are laying on top of each other. Your plant won't "mind" if you only remove leaves from leafy areas, and this prevents moisture from collecting into damp spots, while also improving air circulation around buds.

Watch out. Watch plants closely for signs of bud rot in the late flowering stage, especially on large or dense buds, and especially after cool, wet weather.

When growing outdoors...
Get a strain meant for your local weather. If you live in a place that has short summers and gets cold or rainy early in the fall, don't get a strain that was developed near the equator!
There are fast-flowering, cold-resistant cannabis strains which are designed for growing outdoors in cooler or more rainy climates. For example many auto-flowering strains have quick lives - perfect for a short summer before the Autumn rain or frost.

A good outdoor strain for those worrying about bud rot might be Auto Frisian Dew, an award-winning, mould-resistant strain made for outdoors. This strain goes from seed to harvest in about 12 weeks. Just plant seeds after the last frost in the Spring, then harvest 3 months later.

AutoFrisian Dew is resistant to fungus like bud rot. This strain is quick to harvest and will grow in any climate which has (at least) 3 warm summer months before it starts getting cold or raining.



Breezy location - Try to plan your grow spot so your plants get a breeze, but not too much wind. This can be tricky, and it may mean visiting the grow spot a few times before planting.

Protect your buds from rain. If you know there will be drizzly conditions, cover your plants with a tarpaulin to protect them from most of the rain. Don't put the tarpaulin directly on plants or you'll hurt you buds. Install the tarpaulin up above the plants, and make sure it's held up by the centre part, that makes it so rain runs off the sides of the tarpaulin instead of collecting in the middle.

Shake plants. Some growers shake their plants on dewy mornings or after rain, so any water drops that form on the leaves don't become breeding grounds for spores.

Fungicides, Neem Oil & Burning Sulphur.

In the flowering stage, never use fungicides, spray affected buds with Neem oil, or burn sulphur.

These common tactics are not effective at stopping bud rot, and will make your buds taste, smell and look terrible.

Some growers use fungicides made specifically for Botrytis in the vegetative stage. But when it comes to cannabis, fungicides can only be used as a preventative before any buds have formed.

If you already have bud rot and can't fix your environment (which is the best way to kill Botrytis), I highly recommend cutting your losses and taking down the plant.

Most fungicides are not effective for bud rot. If you do plant to spray plants, it’s recommended to get one that’s specifically been developed to combat Botrytis.

Any treatments for Bud Rot should be applied in the vegetative stage as a preventative.
There's nothing you can spray on your plants after bud rot has already formed. Unfortunately, there aren't any effective fungicides or other treatments that are safe to use with cannabis in the flowering stage



How to Stop Bud Rot from Spreading
The inside of dense buds provide a great place for Bud Rot spores to grow, and that’s the main place you’ll find developed Bud Rot on cannabis plants. Once you've spotted bud rot, it's important to act immediately.

As soon as even one part of a single bud starts showing signs of grey mould, the rot can spread to the rest of the cola and then to other buds on the plant. If triggering conditions (lack of airflow, heat, wetness) have not improved, a single point of infection can quickly ruin the harvest of an entire plant.

Never Spray Your Buds with Anything!
Bud Rot Removal
Immediately remove all rotted parts and nearby areas. The only way to stop the spread is to remove all signs of mould from the plant, then move plants to a warm, dry area with a nice breeze.
Be extremely careful not to let any rot touch any part of the rest of your plant.

What Happens Next?
You can either...
harvest the cannabis plant now
let it continue to ripen.

If your plant have been affected by bud rot, it means they need less dampness, drier air and warmer temperatures. If you can improve the environment, you can allow the plant to continue ripening after you've removed the infected buds.

Here's how to fix the environment:
add additional air circulation
raise the temperature
lower the humidity
prevent wet spots on plant

If you can't fix the environment, I highly recommend cutting your losses at this point. If you know that it's still going to be cool, humid or wet for your plants, it's recommended you harvest immediately to prevent further buds from becoming infected. Buds harvested early are better than mouldy buds!

Whenever you do harvest your healthy buds, be extremely careful during the drying process. Normally growers want to slow dry buds, but if you're worried about mould it's better to dry them faster, with plenty of air circulation and movement.


Post Reply

Return to “Cannabis Deficiencies And Solutions”